This Complete Kit  includes a 24V 250W 300RPM DC Geared Motor and  Compatible E-bike Controller designed to run motors up to 250 Watts. 


This kit has all necessary items to build your brand new e-bike and to save your efforts in looking out for all compatible products and you can get it in just one go at reasonable cost.


This full fledge combination of motor and controller is Universal for bikes.


This kit includes E-bike Throttle with key switch, LED head light, Horn switch, Break lever, Mounting Plate, Axle with coupling, Chain and Sprocket.


 This Kit also includes battery and compatible charger.

Motor Specifications:

  • Voltage: 24 Volt DC

  • Output: 250 Watt

  • Adaption motor: 24V 250W

  • Ambient temperature: -20?C — 45?C

  • Turn potential: 5V

  • Brake potential: Low potential brake

  • RPM (after Reduction) ? 300

  • Full load current ? 13.4A

  • No load Current ? 2.2A

  • Undervoltage protection: 20.5V

  • Current Limiting protection: 21.5A

  • Torque Constant ? 8 N.m (80 kg-cm)

  • Torque stall ? 40 N.m (400 kg-cm)

  • Sprocket: 9Tooth only fits #410 bicycle chains

  • For Chain Size: Pitch 0.5 inch

  • Roller Diameter 0.3 inch

  • Roller Width 0.16 inch

Controller Specifications:

  • Voltage: DC 24V
  • Under Pressure: 20V?1
  • Current Limit: 21A ?1
  • Level Brake: high / low
  • Turn The Voltage: 1.1-4.3V
  • Phase Angle: 60/120
  • Power: 250W
  • Includes attachments for motor, accelerator, brake, battery, battery charging, brake light, power lock.

Battery Specifications:

  • Very Small in size and weight compared to Ni-Cd, Ni-MH and Lead Acid Batteries
  • Nominal Discharge current upto 10 A and can take peak current till 25A for few seconds.
  • Full Charge in 40 to 90 minutes depending upon special charger
  • Long life with full capacity for upto 1000 charge cycles
  • 30X Li-ion 3.7V 2200mAh cells (6S5P)
  • Inbuilt charge protection circuit
  • Low maintenance
  • The battery can be charged to a maximum of 25.2 V on full charge.
  • The battery will work within a voltage range of 20 V to 25.2 V. 
  • The BMS will cut off the battery at approx. 20 V to prevent over-discharging.
  • Maximum safe charging current is 7000 mA.
  • Recommend charging current is maximum 2500mA for longer life
  • One wire each of battery positive(+ terminal) and battery negative(- terminal) will be provided as output of the battery.
  • The charging and discharging of battery is to be done through the same wires.
  • XT60 end connectors as per image are  provided with the battery for easy connections.

Charger Specification:

  • This Charger is for Lithium Ion 24V battery.
  • The charger is based on the modern high-frequency switching power supply structure, built-in microcomputer control, to achieve fast, balanced, turbulent, floating charge automatic control charging, charging speed, accurate and reliable.

  • Current rating: 1.2A to 2A

Package Includes:

  • 1 x E-bike 24V 250W DC Geared Motor
  • 1 x E-bike Motor Controller 24V 250W
  • 1 x Skycell Li-on 24V 11000mAh 6s5p battery with charge protection
  • 1 x Lithium Ion Battery Charger
  • 1 x E-bike Throttle
  • 1 x Throttle handle
  • 1 x Led head light with horn
  • 2 x Brake lever
  • 1 x Mounting Plate
  • 1 x Axle with coupling
  • 1 x chain
  • 1 x Sprocket
  • 1 x Key switch





24V 250W 300RPM DC Geared Motor with Compatible E-Bike Controller and Battery

SKU: GRE 190